Skip to content Skip to footer

Industrial Homogenizers



Weight kg 1.750 - 1.850
Dimensions cm 135 x 190 x 140
Power kw 45
Pistons plungers Nr. 3
Water consumption l/h 90 - 120
Operational pressure (bar) Flow rate from (l/h) Flow rate to (l/h)
100 6.200 11.500
130 6.200 10.000
150 6.200 9.400
180 5.200 7.500
200 4.700 7.000
230 4.200 6.000
250 3.700 5.500
300 3.200 4.700
  • Compression Head guaranteed for 5 YEARS against breakage, made from a single block of special type stainless steel, forged and ultrasonically tested.
  • Valve Groups housed in individual blocks of special AISI 316 stainless steel, each individually inspectable.
  • Pumping pistons with rear cooling chamber, optimal alignment with double guide, special coating (standard) over their entire length in “Diamond Like Carbon”.
  • Interchangeable Valve Seats and Hemispherical Valves designed to handle a very wide range of products.
  • Homogenizing valves of high efficiency thanks to a design focused on maximum stability/alignment of the moving element (Impact Head) and the use of a hydraulic push group to avoid any possible onset of vibrations during operation.
  • Safety valve in sanitary design, operating with a pre-loaded spring with interchangeable shutter and seat.
  • Pump Body made of high-quality cast iron with high resistance and thick walls, developed to withstand heavy loads and cancel operational vibrations.
  • Crankshaft made from solid special steel, thermally treated with super-finish of the goose necks and complete nitriding; it is supported by high-performance roller bearings (bushings used exclusively on the goose necks).
  • Transmission of movement with double reduction stage: trapezoidal belts/pulleys plus a parallel-axis reducer of leading brand (no cooling water required).
  • Forced lubrication with oil level window located on the front of the machine, irregular pressure alarm, intensive filtering of any impurities. Furthermore, for optimal balance/heat dissipation, all parts dedicated to motion transmission are oil bathed.
  • Alternating current motor, of leading brand and 4-pole standard.
  • Frame made with heavy section square steel, powder coated; this solid structure is fully clad in stainless steel panels with a satin finish.
  • Set of first-use spare parts (complete set of Seals, set of Valve group Springs, Safety Valve set).
  • Tools for regular maintenance.
  • Pump Body lubrication oil.
  • User-Maintenance Manual (2 copies + CD ROM).
  • Double stage of servo-assisted homogenization (oleopneumatic group).
  • Digital pressure transducers and analogue pressure gauges with 4-20 mA output signals.
  • Fixed Flow (internal electrical panel of the machine).
  • Variable Flow (external stainless steel electrical panel of the machine).
  • Aseptic Version through the use of sterile condensation barriers produced by a dedicated integrated system.
  • Compensation Lungs at Product Inlet/Outlet, also specific for aseptic productions.
  • Product inlet pressure gauge with alarm contact, with timed management of the disconnection-connection of homogenizing valves.
  • Semi-automatic/automatic control of homogenization pressures.

*Non-binding and subject to change without notice technical specifications.


Valvola omogeneizzante utilizzata per regolare e facilitare il processo di omogeneizzazione dei liquidi.

Remote Homogenizing

Do you have a single-stage homogenizer and want to convert it into a two-stage homogenizer easily, quickly and inexpensively?

Thanks to the Remote Homogenizing Valve (VOD), which consists of a complete homogenizing chamber that can be operated independently of the existing homogenizer, it is possible to transform the single-stage homogenizer into a two-stage homogenizer.

This is made possible by a Remote Homogenizing Valve equipped with a single pressure gauge for reading the homogenizing pressure.

Related products